Rear Power Window Motor Test

Rear Power Window Motor Test

1. Remove the rear power window switch Passenger's Power Window Switch Replacement.

2. Test the motor in each direction by connecting battery power and ground to the rear power window switch 5P connector (A) according to the table.










3. If the motor does not run or fails to run smoothly, go to step 4. If the motor is OK, do the power window master switch input test Power Window Master Switch Input Test.

4. Remove the door panel Service and Repair.

5. Disconnect the 2P connector (A) from the rear power window motor (B).






6. Check for continuity between rear power window switch 5P connector terminals No. 2 and No. 5 and rear power window motor 2P connector terminals No. 1 and No. 2 respectively. There should be continuity.









7. If the wire harness is OK, replace the rear power window motor.