Manufacturer Code Charts: 1305

Navigation System DTC Troubleshooting: 1305

DTC 1305:

Gyro Error 2: ECU Temp XX °C

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- This navigation DTC sets when there is a problem with the internal yaw rate sensor.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information Reading and Clearing Diagnostic Trouble Codes.
- Aftermarket electronic devices located near the navigation unit or GPS antenna can potentially interfere with the operation of the navigation system.

1. Check that the trunk temperature is between -4 °F (-20 °C) and 158 °F (70 °C).

2. Clear hard error code.

3. Turn the ignition switch to LOCK (0) and then back to ON (II).

4. Check for the hard error code.

Is DTC 1305 indicated?

YES -

Replace the navigation unit Service and Repair.�

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the navigation unit Service and Repair.�