Manufacturer Code Charts: 2706

Navigation System DTC Troubleshooting: 2706

DTC 2706:

Gyro Diag:ECU Temp XX °C

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- This navigation DTC sets when the navigation unit internal yaw rate sensor's temperature is out of its specified range.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How To Troubleshoot The Navigation System.

1. Check that the trunk temperature is between -4 °F (-20 °C) and 158 °F (70 °C).

2. Clear the hard error code.

3. Turn the ignition switch to LOCK (0) and then back to ON (II).

4. Check for the hard error code.

Is DTC 2706 indicated?

YES -

Replace the navigation unit Service and Repair.�

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the navigation unit Service and Repair.�