Manufacturer Code Charts: 30

DTC Troubleshooting: P0BFD (30)

DTC P0BFD:

Motor Current Sensor Circuit Malfunction

NOTE:

- Before you troubleshoot, record all freeze data, and any on-board snapshot, and review the general troubleshooting information Initial Inspection and Diagnostic Overview.
- If the DTC cannot be cleared, do the troubleshooting for DTC U1204.

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Start the engine.

4. Check for Pending or Confirmed DTCs with the HDS.

Is DTC P0BFD indicated?

YES -

Go to step 5.

NO -

Intermittent failure, the system is OK at this time.�

5. Check for Pending or Confirmed DTCs with the HDS.

Is DTC P0A5E, P0A5F, P0A61, P0A62, P0A64, or P0A65 indicated?

YES -

Go to the indicated DTC's troubleshooting.�

NO -

Replace the phase motor current sensor Service and Repair, then go to step 8.

6. Turn the ignition switch to ON (II).

7. Clear the DTC with the HDS.

8. Start the engine.

9. Check for Pending or Confirmed DTCs with the HDS.

Is DTC P0BFD indicated?

YES -

Go to step 1.

NO -

Troubleshooting is complete. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.�