Manufacturer Code Charts: 1305

Navigation System DTC Troubleshooting: 1305

DTC 1305:

Gyro Error 2: ECU Temp xx °C

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- This navigation DTC sets when there is a problem with the internal yaw rate sensor.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information Reading and Clearing Diagnostic Trouble Codes.
- Aftermarket electronic devices located near the audio-navigation unit or GPS antenna can potentially interfere with the operation of the navigation system.

1. Check that the dash temperature is between -4 °F (-20 °C) and 158 °F (70 °C).

2. Clear the hard error code.

3. Turn the ignition switch to LOCK (0), and then back to ON (II).

4. Check for the hard error code.

Is DTC 1305 indicated?

YES -

Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation (With Navigation).�

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation (With Navigation).�