B1152

Control System DTCs

DTC Troubleshooting: B1152

DTC B1152 : Gauge Control Module Internal (EEPROM) Error

1. Problem verification:

Problem verification
-1. Clear the DTCs with the HDS.

-2. Turn the ignition switch to LOCK (0) and then back to ON (II).

-3. Wait for at least 6 seconds.

-4. Check for DTCs with the HDS.

Is DTC B1152 indicated?
-YES- Replace the gauge control module (tach) Gauge Control Module (Tach) Removal and Installation.
-NO- Intermittent failure, the system is OK at this time.