KX Models

Advanced Diagnostics

SRS Related DTCs

DTC 85-4x: Initial Failure Of The OPDS Unit (KX Models)






NOTE:
- The "x" at the end of each DTC denotes a numeric character (0 thru 9) or an alpha character (A thru F) that you may also see on the HDS display. The alphanumeric character is unrelated to the AD information or DTC troubleshooting; it is used by the SRS unit manufacture.
- Always check "How to troubleshoot SRS system" and proceed along each "DTC Troubleshooting" procedure.
- Make sure the 12 volt battery is fully charged. If not, the results of tests may not be accurate.
- The SRS indicator will turn on when the battery voltage becomes below 10 volts.
- The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.