Instrument Panel, Gauges and Warning Indicators: Service and Repair

Service Information

Resetting the Lifetime Points

Procedure

1. Resetting The Lifetime Points

NOTE:
* Do steps 1 through 5 within 30 seconds.
* If the ambient meter color is set to always display blue with the custom setting, cancel that setting by following the instructions in the Owner's Manual.

1. Turn the ignition switch to ON (II).

NOTE: If the ECON system is in the ECON ON mode, change it to the ECON OFF mode by pressing the ECON button, and turn the ignition switch to LOCK (0). Then, do this step again.

2. Press and release the brake pedal at least twice.

3. Confirm that the ambient meter color is green.

NOTE: The ambient meter color is set to always be blue with the custom setting, it will not change to green.

4. Press the ECON button twice.

5. Confirm that the ambient meter color disappears.

NOTE: The ambient meter color is set to always be blue with the custom setting, it does not disappear.

6. Turn the ignition switch to LOCK (0).

NOTE: The ECO score and the ECO stage indicator are not displayed unless you let the engine idle for 3 minutes or driving for at least 218 yards (200 m).