Audio Unit Button Illumination Does Not Work (With Multi-Information Display Without Navigation)
Audio System Symptom Troubleshooting - Audio unit button illumination does not work
Audio unit button illumination does not work
NOTE:
* Check the vehicle battery condition first Battery Test.
* Check the connectors for poor connections or loose terminals.
1. Problem verification:
Problem verification
-1. Turn the ignition switch to ON (II).
-2. Turn the combination lighting switch to the parking light position.
-3. Check if the audio unit buttons are illuminated.
Are the buttons illuminated?
-YES- Intermittent failure, the audio unit is OK at this time.
-NO- The failure is duplicated, go to step 2.
2. Determine possible failure area (interior lights circuit, others):
Determine possible failure area (interior lights circuit, others)
-1. Check if several other buttons that are not related to the audio system are illuminated.
Are the buttons illuminated?
-YES- Go to step 3.
-NO- Troubleshoot the interior lights.
3. Multiplex integrated control system DTC check:
Multiplex integrated control system DTC check
-1. Turn the combination light switch off.
-2. Turn the ignition switch to LOCK (0).
-3. Connect the HDS to the DLC.
-4. Turn the ignition switch to ON (II).
-5. Clear the DTCs with the HDS.
-6. Turn the ignition switch to LOCK (0) and then back to ON (II).
-7. Check for DTCs with the HDS.
Are any DTCs indicated?
-YES- Go to indicated DTC's troubleshooting.
-NO- Go to step 4.
4. Open wire check (B_CAN-H line, B_CAN-L line):
Open wire check (B_CAN-H line, B_CAN-L line)
-1. Turn the ignition switch to LOCK (0).
-2. Disconnect the following connectors.
-3. Check for continuity between test points 1 and 2.
Is there continuity?
-YES- Go to step 5.
-NO- Repair an open in the wire(s) between the audio unit and the gauge control module (tach).
5. Audio unit check:
Audio unit check
-1. Substitute a known-good audio switch panel Audio Unit Removal and Installation, and recheck.
Does the symptom go away?
-YES- Replace the original audio switch panel.
-NO- Replace the audio unit Audio Unit Removal and Installation.