Variable Valve Timing Pressure Switch: Service and Repair

Rocker Arm Oil Pressure Switch Removal and Installation

Removal

1. Wiper Arm Assembly





NOTE: Set the wiper arms to the auto-stop position before removal.

1. Remove the cowl top wiper covers (A).

2. Remove the wiper arms (B).

2. Both Side Cowl Covers





1. Remove the side cowl cover (A).

2. The left side is shown; repeat on the right side.

3. Center Cowl Cover





1. Remove the center cowl cover (A).

2. Disconnect the windshield washer tube (B).

3. If necessary, remove the hood rear seal (C).

4. Under Cowl Panel





1. Remove the under cowl panel (A).

5. Rocker Arm Oil Control Valve





1. Remove the rocker arm oil control valve assembly (A) and the rocker arm oil control valve filter (B).

2. Remove the engine wire harness bracket (C).

6. Rocker Arm Oil Pressure Switch





1. Remove the rocker arm oil pressure switch.

Installation

1. Rocker Arm Oil Pressure Switch





1. Install the rocker arm oil pressure switch (A) with a new O-ring (B).

2. Rocker Arm Oil Control Valve





1. Install the engine wire harness bracket (A).

2. Install the rocker arm oil control valve assembly (B) and the rocker arm oil control valve filter (C).

3. Under Cowl Panel





1. Install the under cowl panel (A).

4. Center Cowl Cover





1. If necessary, install the hood rear seal (A).

2. Connect the windshield washer tube (B).

3. Install the center cowl cover (C).

5. Both Side Cowl Covers





1. Install the side cowl cover (A).

2. The left side is shown; repeat on the right side.

6. Wiper Arm Assembly





NOTE: Set the wiper arms to the auto-stop position before installation.

1. Install the wiper arms (A).

2. Install the cowl top wiper covers (B).