Tightening Torque And Sequence

Cylinder Head Bolt Torque





1. Torque the cylinder head bolts in sequence to 39 Nm (4.0 kgfm, 29 lbfft).






2. After torquing, tighten all cylinder head bolts in two steps (90 ° per step) using the sequence shown in step 1. If you are using a new cylinder head bolt, tighten the bolt an extra 90 °.


Cylinder Head Bolt Reusability





1. Measure the diameter of each cylinder head bolt at point A and point B.

2. If either diameter is less than 10.6 mm (0.417 in), replace the cylinder head bolt.


Camshaft Holder

Tighten the bolts to the specified torque in sequence.










Intake Manifold: Specifications


Exhaust Manifold: Catalytic Converter Service and Repair


Camshaft Gear/Sprocket: Specifications