Manufacturer Code Charts: 1402

Navigation System DTC Troubleshooting: 1402

DTC 1402:

Audio Error 2

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when a problem with the internal CD drive is detected.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the general troubleshooting information Reading and Clearing Diagnostic Trouble Codes.

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Check for the hard error code.

Is DTC 1402 indicated?

YES -

Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation (With Navigation).

NO -

Intermittent failure, the system is OK at this time.