Set Speed Doesn't Resume When Resume/Accel Button Is Pressed (Cruise Control Main Switch Turned On)

Set speed does not resume when the resume/accel button is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the brake pedal)

Set speed does not resume when the resume/accel button is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the brake pedal)

Do the cruise control combination switch test Testing and Inspection.

Do the cruise control input test Component Tests and General Diagnostics.
Test the cruise control resume/accel switch signal input.

Check for PGM-FI DTCs Initial Inspection and Diagnostic Overview.

Also check for

Open circuit, loose or disconnected terminals: LT GRN/BLK or BLU wire