A/C - Blower Motor Works On High Speed Only
09-097August 16, 2012
*Applies To:
2009-11 Fit - ALL
2012 Fit - From VIN JHMGE8...CC000001 thru JHMGE8...CC033238*
HVAC Blower Motor Works Only On High Speed
(Supersedes 09-097, dated March 4, 2011, to revise the information marked by the asterisks)
*REVISION SUMMARY
Under Applies To, all 2011 models and some 2012 models were added.*
SYMPTOM
The HVAC blower motor works only on high speed.
PROBABLE CAUSE
Excessive current draw from the HVAC blower motor causes the blower resistor to fail.
CORRECTIVE ACTION
Replace the HVAC blower motor and the blower resistor.
PARTS INFORMATION
HVAC Blower Motor:
P/N 79310-TF0-G01
Blower Resistor:
P/N 79335-TF0-G01
WARRANTY CLAIM INFORMATION
The normal warranty applies.
Failed Part: P/N 79310-TF0-G01
Defect Code: 06801
Symptom Code: 03217
Skill Level: Repair Technician
REPAIR PROCEDURE
1. Remove the passenger's dashboard undercover:
^ Gently pull down the front edge to detach the clips.
^ Pull the cover toward you to release the pins.
2. Replace the HVAC blower motor:
^ Disconnect the connector.
^ Remove the three screws and the blower motor.
^ Install the new blower motor with the three screws, then connect the connector.
3. Replace the blower resistor:
^ Disconnect the connector.
^ Remove the two screws and the blower resistor.
^ Install the new blower resistor with the two screws, then connect the connector.
4. Reinstall the passenger's dashboard undercover by pushing the pins and the clips securely into place. Replace any damaged clips.
Disclaimer