Manufacturer Code Charts: 61

VSA DTC Troubleshooting: 61, 62

DTC 61:

Battery Voltage Low

DTC 62:

Battery Voltage High

NOTE:

- Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information.

- If the vehicle has high electric load or a weak 12 volt battery, DTC 61 may be stored when starting the engine.

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0), then turn it to ON (II) again.

Does the ABS indicator come on and stay on?

YES -

Go to step 4.

NO -

Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting.

4. Check for DTCs with the HDS.

Is DTC 61 or 62 indicated?

YES -

Check the 12 volt battery 12 Volt Battery Test and the charging system indicator circuit troubleshooting Component Tests and General Diagnostics.

NO -

Do the appropriate troubleshooting for the DTC indicated.