Operation CHARM: Car repair manuals for everyone.

Hood Sensor/Switch (For Alarm): Testing and Inspection




Security Hood Switch Test

1. Open the hood.

2. Disconnect the 2P connector (A) from the security hood switch (B).





3. Check for continuity between the terminals.

- There should be continuity between the terminals No. 1 and No. 2 when the hood is opened (lever released).
- There should be no continuity between the terminals No. 1 and No. 2 when the hood is closed (lever pushed down).

4. If the continuity is not as specified, the switch is faulty; replace the hood latch Service and Repair.