Resetting the Maintenance Minder

Resetting the Engine Oil Life Display

If maintenance service is done by someone other than the dealer, reset the maintenance minder as follows:

1. Turn the ignition switch to ON (II) position.








2. If the engine oil life is not displayed, press the SEL/RESET button on the steering wheel repeatedly.
3. Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.





4. Select "RESET" by pressing the INFO button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to "100." If you want to cancel the oil life reset mode select "CANCEL."

Important Maintenance Precautions
If you have the required service done but do not reset the display, or reset the display without doing the service, the system will not show the proper maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.