Trim Panel Replacement - Knee Bolster

Trim Panel Replacement - Knee Bolster

Removal Procedure

1. Loosen and move reward center console for access to knee bolster bolt. Refer to Console Replacement (Console Replacement) .




2. Remove screws/bolts that hold knee bolster trim panel to I/P.



Installation Procedure






Notice: Refer to Fastener Notice Service Precautions in Cautions and Notices.

1. Install knee bolster trim panel to I/P.

Tighten screws to 2 Nm (18 lb in).

2. Align and move forward center console in place and fasten to center console bracket. Refer to Console Replacement (Console Replacement) .