Rear Seat Replacement - No. 1

Seat Replacement - Rear No. 1

Removal Procedure

1. Fold the seat cushions forward to access the seat retaining bolts.
2. Disconnect the electrical connectors, if equipped.
3. Remove the seat retaining bolts.
4. Fold the seat cushions back to the closed position.




5. Remove the seat from the vehicle.



Installation Procedure





1. Install the seat into the vehicle.
2. Fold the seat cushions forward.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the seat retaining bolts.

Tighten the bolts to 55 Nm (41 lb ft).

4. Connect the electrical connectors, if equipped.
5. Fold the seat cushion back to the closed position.