Bracket Replacement - Steering Column
BRACKET REPLACEMENT - STEERING COLUMNREMOVAL PROCEDURE
1. Loosen and move center console reward for access to the knee bolster bolt. Refer to Console Replacement.
2. Remove the screws/bolts that hold the knee bolster trim panel to the I/P.
3. Remove the nuts that hold the knee bolster deflector to the I/P.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Align and fasten the nuts that hold the knee bolster deflector.
Tighten
Tighten the nuts to 2 N.m (18 lb in).
2. Fasten the screws/bolts that hold the knee bolster trim panel to the I/P. Refer to Trim Panel Replacement - knee Bolster.
3. Align and move forward center console in place and fasten to the center console bracket. Refer to Console Replacement.