Handle Replacement - Instrument Panel (I/P) Compartment
HANDLE REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENTREMOVAL PROCEDURE
1. Remove compartment door from instrument panel subscript.
2. Place the compartment door on a work bench.
3. Remove the retaining screws to gain access to compartment handle.
4. Remove the compartment handle assembly.
INSTALLATION PROCEDURE
1. Install new handle assembly to compartment door.
2. Ensure the linkage for the top compartment door are all connected before installing the inside panel.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the inside panel screws.
Tighten
Tighten the screws to 1.6 N.m (14 lb in).
4. Inspect the operation of the top compartment door
5. Install the compartment door to the I/P.