Trim Panel Replacement - Knee Bolster

TRIM PANEL REPLACEMENT - KNEE BOLSTER

REMOVAL PROCEDURE




1. Loosen and move reward center console for access to knee bolster bolt. Refer to Console Replacement.
2. Remove screws/bolts that hold knee bolster trim panel to I/P.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install knee bolster trim panel to I/P.

Tighten
Tighten screws to 2 N.m (18 lb in).

2. Align and move forward center console in place and fasten to center console bracket. Refer to Console Replacement.