Trim Plate Replacement - Instrument Panel (I/P) Accessory Right

TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY RIGHT

REMOVAL PROCEDURE
1. Remove the screws that hold the trim panel to the I/P.
2. Remove the trim from the tabs in the I/P.

INSTALLATION PROCEDURE
1. Align the trim pad with the I/P substraight tabs.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Fasten the trim panel to the I/P.

Tighten
Tighten the screws to 2 N.m (18 lb in).