54. Reverse Input Clutch Bushing Replacement
REVERSE INPUT CLUTCH BUSHING REPLACEMENTREMOVAL PROCEDURE
TOOLS REQUIRED
- J 25019 Bushing Service Set
- J 34196-B Transmission Bushing Service Set
- J 7004-1 Universal Remover
- J 8092 Driver Handle
1. Inspect the reverse input clutch housing and drum assembly for the following conditions:
- Damaged or worn bushings
- Surface on the hub and outer housing
- Leak at the weld
2. Using the J 25019-16 with the J 7004-1, remove the reverse input clutch front bushing (603).
3. Using the J 25019-4 with the J 8092, remove the reverse input clutch rear bushing (606).
INSTALLATION PROCEDURE
1. Using the J 25019-9 with the J 8092, install a reverse input clutch front bushing (603).
2. Using the J 34196-3 which is part of kit J34196-B with the J 8092, install a reverse input clutch rear bushing (606).