85. Case Extension Bushing Replacement (2WD Applications Only)

CASE EXTENSION BUSHING REPLACEMENT (2WD APPLICATIONS ONLY)

TOOLS REQUIRED
- J 8092 Driver Handle
- J 23062-14 Bushing Remover
- J 34196-B Transmission Bushing Service Set




1. Inspect the case extension for the following conditions:
- Porosity
- Cracks
- Nicks
- Burrs
- Worn bushings




2. Remove the case extension oil seal assembly (34) (model dependent).




3. Using the J 23062-14 and the J 8092, remove the case extension bushing (33).




4. Using the J 34196-4 which is part of kit J 34196-B and the J 8092, install a case extension bushing (33).