Removal and Replacement

Front Side Door Replacement

Removal Procedure

1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement (Front Side Door Trim Panel Replacement) .
2. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement (Front Side Door Water Deflector Replacement) .
3. Remove the wiring harness. Refer to Front Side Door Wiring Harness Replacement.
4. Remove the fasteners retaining the door check link to the body. Refer to Door Check Link Replacement (Service and Repair) .




5. Remove the fastener (1) retaining the door hinge halves together.
6. With an assistant, lift up on the door and remove the door from the vehicle.



Installation Procedure






Notice: Refer to Fastener Notice Service Precautions in Cautions and Notices.

1. With an assistant, align the door to the vehicle and install the fastener (1) that retains the door hinge halves together.

Tighten the fastener to 9 Nm (7 lb ft).

2. Transfer components as necessary.
3. Install the fasteners that retain the door check link to the body. Refer to Door Check Link Replacement (Service and Repair) .
4. Install the wiring harness. Refer to Front Side Door Wiring Harness Replacement.
5. Install the water deflector. Refer to Front Side Door Water Deflector Replacement (Front Side Door Water Deflector Replacement) .
6. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (Front Side Door Trim Panel Replacement) .