Driver Knee Bolster Panel Replacement

Driver Knee Bolster Panel Replacement

Removal Procedure

1. Loosen and move reward center console for access to knee bolster bolt. Refer to Console Replacement (Console Replacement) .
2. Remove the instrument panel cluster (IPC) trim. Refer toInstrument Cluster Trim Panel Replacement (Instrument Cluster Trim Panel Replacement) .




3. Remove the screws/bolts that hold knee bolster trim panel to I/P.
4. Remove the knee bolster trim.



Installation Procedure






Notice: Refer to Fastener Notice Service Precautions in Cautions and Notices.

1. Install the knee bolster trim panel to I/P.
2. Install the knee bolster trim panel screws.

Tighten the screws to 2 Nm (18 lb in).

3. Install the IPC trim. Refer toInstrument Cluster Trim Panel Replacement (Instrument Cluster Trim Panel Replacement) .
4. Align and move forward center console in place and fasten to center console bracket. Refer to Console Replacement (Console Replacement) .