Instrument Panel Accessory Trim Plate Replacement - Right Side

Instrument Panel Accessory Trim Plate Replacement - Right Side

Removal Procedure





1. Remove the I/P (Instrument Panel) compartment. Refer toInstrument Panel Compartment Replacement (Instrument Panel Compartment Replacement) .
2. Remove the I/P assist handle. Refer toInstrument Panel Assist Handle Replacement (Instrument Panel Assist Handle Replacement) .
3. Remove the screws that hold the trim panel to the I/P.
4. Remove the trim from the tabs in the I/P.



Installation Procedure





1. Align the trim pad with the I/P substrate tabs.

Notice: Refer to Fastener Notice Service Precautions in Cautions and Notices.

2. Install the trim panel screws.

Tighten the screws to 2 Nm (18 lb in).

3. Install the I/P compartment. Refer toInstrument Panel Compartment Replacement (Instrument Panel Compartment Replacement) .
4. Install the I/P assist handle. Refer toInstrument Panel Assist Handle Replacement (Instrument Panel Assist Handle Replacement) .