Console Replacement
CONSOLE REPLACEMENTREMOVAL PROCEDURE
1. Remove the console upper trim plate.
2. Disconnect the console electrical connector.
3. Remove the bolts holding center console to center console bracket.
4. Remove the center console.
INSTALLATION PROCEDURE
IMPORTANT: Make sure HVAC duct is aligned with center console.
1. Align center console to center console bracket and route the electrical wiring through console.
2. Connect the console electrical connector.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the center console to center console bracket.
4. Install the center console bolts.
Tighten
Tighten the bolts to 9 N-m (80 lb in).
5. Install the top panel to center console.