Trim Panel Replacement - Knee Bolster
TRIM PANEL REPLACEMENT - KNEE BOLSTERREMOVAL PROCEDURE
1. Loosen and move rearward center console for access to knee bolster bolt. Refer to Console Replacement.
2. Remove the instrument panel cluster (IPC) trim.
3. Remove screws/bolts that hold knee bolster trim panel to I/P.
4. Remove the knee bolster trim.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install knee bolster trim panel to I/P.
2. Install the knee bolster trim panel screws.
Tighten
Tighten screws to 2 N.m (18 lb in).
3. Install the IPC trim.
4. Align and move forward center console in place and fasten to center console bracket. Refer to Console Replacement.