Trim Plate Replacement - Instrument Panel (I/P) Accessory Right
TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY RIGHTREMOVAL PROCEDURE
1. Remove the I/P (Instrument Panel) compartment.
2. Remove the I/P assist handle.
3. Remove the screws that hold the trim panel to the I/P.
4. Remove the trim from the tabs in the I/P.
INSTALLATION PROCEDURE
1. Align the trim pad with the I/P substrate tabs.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the trim panel screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
3. Install the I/P compartment.
4. Install the I/P assist handle.