Rear Side Door Window Stabilizer Replacement

Rear Side Door Window Stabilizer Replacement

Removal Procedure

1. Position the window in the full up position.
2. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement (Front Side Door Trim Panel Replacement) .
3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement (Front Side Door Water Deflector Replacement) .




4. Remove the fastener (1) retaining the stabilizer to the door.
5. Remove the stabilizer (2).



Installation Procedure





1. With the window in the full up position, position the stabilizer (2) in place inside the door.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the fastener (1) retaining the stabilizer to the door.

Tighten the fasteners to 9 Nm (7 lb ft).

3. Install the water deflector. Refer to Front Side Door Water Deflector Replacement (Front Side Door Water Deflector Replacement) .
4. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (Front Side Door Trim Panel Replacement)