Bracket Replacement - Instrument Panel (I/P) Center Support

Bracket Replacement - Instrument Panel (I/P) Center Support

Removal Procedure

1. Remove the center console from the center console bracket. Refer to Console Replacement (Console Replacement) .
2. Remove the extention panel from the I/P. Refer toInstrument Panel (I/P) Extension Trim Plate Replacement (Instrument Panel (I/P) Extension Trim Plate Replacement) .




3. Remove the bolt holding the bracket assembly-I/P center.




4. Remove the bracket from the I/P and floor.



Installation Procedure






Notice: Refer to Fastener Notice in Cautions and Notices.

1. Align the center bracket with the I/P and floor, then bolt the bracket in place.

Tighten the bolt to 25 Nm (18 lb in).

2. Install the extention panel the I/P. Refer toInstrument Panel (I/P) Extension Trim Plate Replacement (Instrument Panel (I/P) Extension Trim Plate Replacement) .
3. Install the center console to the center console bracket. Refer to Console Replacement (Console Replacement) .