Trim Panel Replacement - Knee Bolster

Trim Panel Replacement - Knee Bolster

Removal Procedure

1. Loosen and move reward center console for access to knee bolster bolt. Refer to Console Replacement (Console Replacement) .
2. Remove the instrument panel cluster (IPC) trim. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster (Trim Panel Replacement - Instrument Panel (I/P) Cluster) .




3. Remove the screws/bolts that hold knee bolster trim panel to I/P.
4. Remove the knee bolster trim.



Installation Procedure






Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the knee bolster trim panel to I/P.
2. Install the knee bolster trim panel screws.

Tighten the screws to 2 Nm (18 lb in).

3. Install the IPC trim. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster (Trim Panel Replacement - Instrument Panel (I/P) Cluster) .
4. Align and move forward center console in place and fasten to center console bracket. Refer to Console Replacement (Console Replacement) .