Molding Replacement - Endgate Center

MOLDING REPLACEMENT - ENDGATE CENTER

REMOVAL PROCEDURE




1. Fold the rear seats forward.
2. Remove the rear folding seat back covers.
3. Remove the midgate hinge cover trim (1).




4. Pull the endgate center molding (1) towards the front of the vehicle to release the clips.
5. Remove the endgate center pillar molding.

INSTALLATION PROCEDURE




1. Position the endgate center molding (1) to the body and align the clips to the body.
2. Push the endgate center molding (1) towards the rear of the vehicle to engage the molding clips.




3. Install midgate hinge trim cover (1).
4. Install the rear folding seat back covers.
5. Restore the rear seats to the upright position.