Bracket Replacement - Instrument Panel (I/P) Center Support

BRACKET REPLACEMENT - INSTRUMENT PANEL (I/P) CENTER SUPPORT

REMOVAL PROCEDURE
1. Remove the center console from the center console bracket.
2. Remove the extention panel from the I/P.




3. Remove the bolt holding the bracket assembly-I/P center.




4. Remove the bracket from the I/P and floor.

INSTALLATION PROCEDURE




1. Align the center bracket with the I/P and floor, then bolt the bracket in place.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolt to 25 N.m (18 lb in).

2. Install the extention panel the I/P.
3. Install the center console to the center console bracket.