Bracket Replacement - Steering Column

BRACKET REPLACEMENT - STEERING COLUMN

REMOVAL PROCEDURE
1. Loosen and move center console reward for access to the knee bolster bolt. Refer to Console Replacement .
2. Remove the screws/bolts that hold the knee bolster trim panel to the I/P.




3. Remove the nuts that hold the knee bolster deflector to the I/P.

INSTALLATION PROCEDURE




1. Align and fasten the nuts that hold the knee bolster deflector.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nuts to 2 N.m (18 lb in).

2. Fasten the screws/bolts that hold the knee bolster trim panel to the I/P. Refer to Trim Panel Replacement - Knee Bolster.
3. Align and move forward center console in place and fasten to the center console bracket. Refer to Console Replacement.