Cupholder Replacement

CUPHOLDER REPLACEMENT

REMOVAL PROCEDURE




1. Loosen the locking screw that fastens the shift lever to the shifter.
2. Remove the shifter.




3. Using a flat bladed tool, pry up on the cup holder to release the clips.
4. Disconnect the PRNDL lamps from the cup holder.
5. Remove the cup holder.

INSTALLATION PROCEDUREs




1. Connect the lamps to the cup holder.
2. Align the cup holder to the center console.
3. Push the cup holder firmly into place to engage the clips.




4. Install shift handle to shifter and use hex nut to fasten in place.

Tighten the nut to 1.6 N.m (14 lb in).