Trim Panel Replacement - Knee Bolster

TRIM PANEL REPLACEMENT - KNEE BOLSTER

REMOVAL PROCEDURE
1. Loosen and move reward center console for access to knee bolster bolt. Refer to Console Replacement .
2. Remove the instrument panel cluster (IPC) trim.




3. Remove the screws/bolts that hold knee bolster trim panel to I/P.
4. Remove the knee bolster trim.

INSTALLATION PROCEDURE




1. Install the knee bolster trim panel to I/P.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the knee bolster trim panel screws.

Tighten the screws to 2 N.m (18 lb in).

3. Install the IPC trim.
4. Align and move forward center console in place and fasten to center console bracket.