Operation CHARM: Car repair manuals for everyone.
Home >> Hummer >> 2005 >> H2 V8-6.0L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Service and Repair >> Body Control Module Replacement

Body Control Module Replacement



BODY CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the battery cable.
2. Remove the instrument panel (I/P) carrier.
3. Remove the body control module (BCM) (1) from the BCM bracket.

INSTALLATION PROCEDURE




1. Install the BCM (1) into the bracket.
2. Install the I/P carrier.
3. Connect the battery negative cables.
4. Setup the BCM customized options. Refer to Body Control Module (BCM) Programming/RPO Configuration.
pro multis · About Operation CHARM