50. Reverse Input Clutch Bushing Replacement

Reverse Input Clutch Bushing Replacement

Removal Procedure

^ Tools Required
^ J 25019 Bushing Service Set
^ J 34196-B Transmission Bushing Service Set
^ J 7004-A Universal Remover
^ J 8092 Universal Driver Handle - 3/4 in - 10





1. Inspect the reverse input clutch housing and drum assembly for the following conditions:
^ Damaged or worn bushings
^ Surface on the hub and outer housing
^ Leak at the weld





2. Using the J 25019-16 with the J 7004-A , remove the reverse input clutch front bushing (603).





3. Using the J 25019-4 with the J 8092 , remove the reverse input clutch rear bushing (606).

Installation Procedure





1. Using the J 25019-9 with the J 8092 , install a reverse input clutch front bushing (603).





2. Using the J 34196-3 which is part of kit J 34196-B with the J 8092 , install a reverse input clutch rear bushing (606).