63. Oil Pump Cover and Body Assemble

Oil Pump Cover and Body Assemble

^ Tools Required
^ J 21368 Pump Body and Cover Alignment Band





1. Place the oil pump cover onto the oil pump body and put stator shaft through a hole in the bench.
2. Install the pump cover bolts (223) finger tight only.
3. Install the J 21368.

4. Notice: Refer to Fastener Notice in Service Precautions.

^ Tighten the pump cover bolts (223).
^ Tighten the bolts to 24 Nm (18 ft. lbs.).
5. Remove the J 21368.