Rear Side Door Window Replacement

Window Replacement - Rear Door

Removal Procedure

1. Remove the door trim panel. Refer to Trim Panel Replacement - Side Rear Door (Rear Side Door Trim Panel Replacement) .
2. Remove the water deflector. Refer to Water Deflector Replacement - Rear Door (Rear Side Door Water Deflector Replacement) .




3. Remove the run channel. Refer to Window Run Channel Replacement - Rear Door (Window Run Channel Replacement - Rear Door) .
4. Remove the stabilizer. Refer to Window Stabilizer Replacement - Rear Door (Rear Side Door Window Stabilizer Replacement) .
5. Remove the outer sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Outer (Sealing Strip Replacement - Rear Door Window Belt Outer) .
6. Loosen the clamps (1) securing the glass to the window module.
7. Remove the window through the opening at the bottom of the window frame.



Installation Procedure





1. Slide the window through the opening at the bottom of the window frame into position in the window clamps (1).
2. Install the sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Outer (Sealing Strip Replacement - Rear Door Window Belt Outer) .

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the run channel. Refer to Window Run Channel Replacement - Rear Door (Window Run Channel Replacement - Rear Door) .

Tighten the clamps to 9 Nm (6 lb ft).

4. Install the stabilizer. Refer to Window Stabilizer Replacement - Rear Door (Rear Side Door Window Stabilizer Replacement) .
5. Operate the window to ensure proper operation.
6. Install the water deflector. Refer to Water Deflector Replacement - Rear Door (Rear Side Door Water Deflector Replacement) .
7. Install the door trim panel. Refer to Trim Panel Replacement - Side Rear Door (Rear Side Door Trim Panel Replacement) .