Liftgate Replacement

Liftgate Replacement

Removal Procedure

1. Open the liftgate.
2. Remove the liftgate trim panel.
3. Remove the wiring harness.
4. Disconnect the wiper washer hose.
5. Remove the liftgate struts.




6. With an assistant securing the liftgate, remove the bolts (1) retaining the liftgate to the liftgate hinge.
7. With the aid of an assistant, remove the liftgate from the vehicle.

Installation Procedure

1. Transfer components, as necessary, from liftgate being replaced to liftgate being installed.
2. With the aid of an assistant, install the liftgate to the vehicle.






Notice: Refer to Fastener Notice.

3. Install the bolts (1) that retain the liftgate to the liftgate hinge.

Tighten the bolts to 25 N.m (18 lb ft).

4. Install the liftgate struts.
5. Connect the wiper washer hose.
6. Install the wiring harness to the liftgate.
7. Install the liftgate trim panel.