Operation CHARM: Car repair manuals for everyone.

Fan Shroud: Service and Repair



Fan Shroud Replacement

Removal Procedure

1. Loosen the air cleaner outlet duct clamps from the throttle body.
2. Loosen the air cleaner outlet duct clamps from the mass airflow sensor.
3. Remove the air cleaner outlet duct.




4. Remove the radiator inlet hose from the fan shroud retainer (3).
5. Remove the bolt (5) from the fan shroud (3).
6. Remove the transmission oil cooler line from the fan shroud retainer.
7. Rotate the slip ring from under the fan shroud.




8. Remove the bolts (4) from the fan shroud (3).
9. Remove the fan shroud (3) from the vehicle.

Installation Procedure




1. Install the fan shroud (3) to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the bolts (4) to the fan shroud (3).

Tighten the bolts to 9 N.m (80 lb in).

3. Install the transmission oil cooler line to the fan shroud retainer.
4. Rotate the slip ring to the original position.
5. Install the bolt (5) to the fan shroud (3).

Tighten the bolt to 5 N.m (44 lb in).




6. Install the radiator inlet hose to the fan shroud retainer (3).
7. Install the air cleaner outlet duct.
8. Tighten the air cleaner outlet duct clamp at the throttle body.

Tighten the clamp screw to 7 N.m (62 lb in).

9. Tighten the air cleaner outlet duct clamp at the mass airflow sensor.

Tighten the clamp screw to 7 N.m (62 lb in).