50. Engine Front Cover Cleaning and Inspection

Engine Front Cover Cleaning and Inspection





Important:
^ Do not use the crankshaft oil seal again. Install a NEW crankshaft oil seal during assembly.

^ Do not use the front cover-to-engine block gasket again. Install a NEW gasket during assembly.

Remove the crankshaft oil seal (140) from the front cover.
1. Clean the cover in solvent. Remove the sealant from the cover oil pan surface. Caution: Refer to Safety Glasses Caution.

2. Dry the cover with compressed air.
3. Inspect the gasket sealing surfaces for excessive scratches or gouging.
4. Inspect the cover-to-oil pan threaded bolt holes for damaged threads or debris.
5. Inspect the crankshaft oil seal mounting bore for damage.