Rear Side Marker Lamp Replacement (SUT Left)

Rear Side Marker Lamp Replacement (SUT Left)

Removal Procedure




1. Remove the LH rear compartment side trim panel (1).




2. Remove the screws retaining the exterior lamp lens to the outer body panel.




3. Disconnect the electrical connector (4) from the main body harness (2).
4. Remove the left rear side marker lamp with harness from the rear body panel.

Installation Procedure




1. Position the harness through the body panel opening (3).
2. Connect the electrical connector (4) to the main body harness (2).
3. Ensure the electrical connection is secure to the inside body panel (1).




4. Position the lamp housing to the outer body panel.

Notice: Refer to Fastener Notice.

5. Install the screws with foam washers.

Tighten the screws to 3 N.m (26 lb in).




6. Install the LH rear compartment side trim panel (1).