Seat Belt Latch: Service and Repair

Seat Belt Buckle and Latch Replacement - No. 2 Rear

Removal Procedure




1. Remove the handle mounting screws (1).
2. Partially remove the seat cushion cover by separating the cushion trim J-strips.




3. Remove the bolts attaching the buckle to the seat cushion frame.
4. Remove the buckle from the seat frame.

Installation Procedure




1. Install the buckle to the seat frame.

Notice: Refer to Fastener Notice.

2. Install the buckle bolts.

Tighten the bolts to 53 N.m (39 lb ft).




3. Connect the seat cushion cover by joining the cushion J-strips.
4. Install the handle mounting screws.

Tighten the screws to 7 N.m (61 lb in).