Removal and Replacement

Battery Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution.




1. Disconnect the negative battery cable.
2. Disconnect the positive battery cable.




3. Remove the battery hold down retainer bolt and retainer.
4. Remove the battery.
5. Remove the battery insulator.

Installation Procedure




1. Install the battery insulator, if necessary.
2. Install the battery.

Notice: Refer to Fastener Notice.

3. Install the battery hold down retainer and bolt.

Tighten the battery hold down retainer bolt to 25 N.m (18 lb ft).

4. Connect the positive battery cable.

Tighten the positive battery cable bolt to 17 N.m (13 lb ft).




5. Connect the negative battery cable.