Power Brake Booster Outlet Front Pipe Replacement

Power Brake Booster Outlet Front Pipe Replacement

Removal Procedure




1. Remove the brake master cylinder assembly.




2. Remove the brake booster outlet pipe fittings (1) from the hydraulic brake booster pump (3) and the brake master cylinder (4).
3. Remove the brake booster outlet pipe (2).

Installation Procedure




1. Position the brake booster outlet pipe (2) for installation.

Notice: Refer to Fastener Notice.

2. Finger tighten the brake booster outlet pipe fittings (1) at the hydraulic brake booster pump (3) and the brake master cylinder (4).

Tighten the outlet pipe fittings to 15 N.m (11 lb ft).




3. Install the brake master cylinder assembly.